Headlamp high/low-beam changer, Flash-to-pass, Windshield wipers – Saturn 2009 VUE User Manual

Page 117: Headlamp high/low-beam, Changer -7, Flash-to-pass -7 windshield wipers -7

Advertising
background image

Have the bulbs replaced. If a bulb
is not burned out, check the fuse.
See Fuses and Circuit Breakers on
page 5-80
and for burned-out bulbs.

Headlamp High/
Low-Beam Changer

2 3

Headlamp High/Low Beam

Changer: Push the turn signal/
multifunction lever away from you
to turn the high beams on.

Pull the lever towards you to return to
low beams.

This indicator light turns on in the
instrument panel cluster when the
high beam headlamps are on.

Flash-to-Pass

This feature lets you use your
high-beam headlamps to signal a
driver in front of you that you want
to pass.

To flash the high beams from
low beam, pull the turn signal/
multifunction lever all the way
towards you. Then release it.

Windshield Wipers

The windshield wiper lever is
located on the right side of the
steering column.

Push up or pull down on the lever
to place it in one of the following
positions.

8

(Mist): For a single wiping

cycle. The lever returns to its
starting position when released.
For more cycles, hold the lever
down before releasing it.

9

(Off): Turns the wipers off.

&

(Intermittent): Sets a delay

between wipes. To set for a shorter
or longer delay between wipes,
move the switch on top of the
lever left or right to decrease
or increase wiper movement.

a

(Low): For slow, steady wiping

cycles.

1

(High): For rapid wiping cycles.

Clear ice and snow from the
wiper blades before using them.
If the wiper blades are frozen
to the windshield, gently
loosen or thaw them.

Instrument Panel

3-7

Advertising