Samsung SVD-4700 - Manual (Page 22)

COLOR DOME CAMERA User Guide 42 COLOR DOME CAMERA User Guide 43
Specifications
SVD-4700N SVD-4700P
POWER
Input Voltage
AC 24V(±10%) , DC 12VV(±10%)
Power Consumption MAX 4.0W
CCD
Imaging Device
1/4 inch, Super HAD color CCD
Total Pixels 811(H) x 508(V) 795(H) x 596(V)
Effective Pixels 768(H) x 494(V) 752(H) x 582(V)
OPTICS
Optics
12X f=3.94mm(WIDE) ~ 46.05mm(TELE) / F1.67 ~F1.88
Min. Focus Distance 1,800mm(TELE)
D. ZOOM OFF/ON (Limit 16x)
Angle Field of view H : Appr. 51.54°(Wide) to 4.50°(Tele) / V : Appr. 39.24°(Wide) to 3.38°(Tele)
SYNC
Scanning System
2:1 Interlace
Synchronization Internal / Line-Lock
Frequency H :15.734 KHz / V : 59.94 Hz H : 15.625 KHz / V : 50.00 Hz
ELECTRICAL
Resolution
Color : 580TV Lines(Min.) / B/W : 680TV Lines(Min.)
Min. Illumination Color : 0.2 Lux/F1.6 (50 IRE) / B/W : 0.004 Lux/F1.6 (50 IRE)
S/N (Y signal) 52 dB (AGC Off,Weight ON)
Video Output CVBS : 1.0Vp-p/75Ω
Focus Auto / Manual / One push
Zoom Movement Speed 1.9 sec : WIde to Tele
IRIS Control Auto,Manual
Lens Initialize Built-In
Camera Title OFF / ON (Displayed 15 characters)
Camera ID 255 ID Selectable
Day & Night Auto / COLOR / B/W
Gain Control LOW / MEDIUM / HIGH / MANUAL / OFF
White Balance ATW / AWC / MANUAL / INDOOR / OUTDOOR (1,700k ~ 11,000K)
Back Light Compensation SSDR / BLC / HLC / OFF
SHUTTER ESC / FLK / MANUAL (1/60(PAL 1/50)~1/120K sec, x2 ~ x512 sec)
O.S.D
Korean, English, Japanese, Spanish,
French, Portuguese, Taiwanese
English, Spanish, French, Italian, German,
Polish, Russian, Czech, Chinese,
Portuguese, Romanian, Serbian, Swedish,
Danish, Turkish
Troubleshooting
If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an authorized technician.
• Nothing appears on the screen.
▶ Check that the power cord and line connection between the camera and monitor are
fixed properly.
▶ Check that you have properly connected VIDEO cable to the camera VIDEO output jack.
• The image on the screen is dim.
▶ Is lens stained with dirt? Clean your lens with soft, clean cloth.
▶ Set the monitor to proper condition.
▶ If the camera is exposed to too strong light, change the camera position.
• The image on the screen is dark.
▶ Adjust the contrast feature of the monitor.
▶ If you have an intermediate device, set the 75Ω / Hi-z properly.
• The camera is not working properly, and the surface of the camera is hot.
▶ Check that you have properly connected the camera to an appropriate power source.
• The SENS-UP function does not work.
▶ Check that AGC of EXPOSURE SETUP menu is ‘OFF’.
▶ Check that SHUTTER of EXPOSURE SETUP menu is ‘A.FLK’ or ‘MANUAL’.
• The Motion Detection function does not work.
▶ Check that MOTION DET of SPECIAL SETUP menu is ‘OFF’.
• Color is not correct.
▶ Check the setting of WHITE BAL SETUP menu .
• The screen flickers continually.
▶ Check that direction of camera turns toward the Sun.
• When coaxial communication is not available:
▶ Make sure that the camera and monitor are installed within the recommended distance.
▶ Use the video amplifier equivalent to coaxitron if the recommended installation distance
is exceeded.