Samsung SR-L36 - Manual (Page 8)

7
The temperature display ( ➃ ) flashes “– –” if there has been a power failure. Check that
the food stored in the appliance has not gone bad.
You must empty the refrigerator before pressing the VAC button.
REF.TEMP Button
• To change the refrigerator temperature:
– Press the REF.TEMP button.
The current setting temperature is displayed ( ➃ ) preceded by “R” ( ➁ ).
– Press the REF.TEMP button one or more times or hold it down until the required temperature is
displayed ( ➃ ).
– When you complete the setting of refrigerator temperature, the refrigerator temperature display
( ➃ ) flashes 5 times and returns to the setting temperature of the freezer.
• The temperature changes in sequence. After +6°C, the display returns to +1°C.
• Refrigerator temperature range: +1°C to +6°C.
4
ECO Button
• To set the most energy-efficient temperature automatically for the refrigerator and freezer, simply
press the ECO button.
Freezer temperature: -17°C.
Refrigerator temperature: 6°C.
• The ECO indicator ➄ remains on while the ECO function is operating.
• If you press the FRE.TEMP or REF.TEMP button, the ECO function is cancelled and the appliance
is set to the new temperature selected.
5
VAC Button
• If you are going on a long vacation or business trip or you do not need to use the refrigerator,
press the VAC button.
• The refrigerator is switched off but the freezer remains on.
• The VAC indicator (
➅ ) remains on while the VAC function is operating.
6
Caution
If the SUPER, ECO or VAC mode is already selected and you press one of the other
buttons, the current mode is cancelled and the mode corresponding to the button
pressed is selected.
It is possible, if the ECO mode is already selected and you press SUPER mode, the
temperature of refrigerator and freezer is controlled independenty.
(refrigerator : ECO mode, freezer : SUPER mode)
Note
Note
SR-L39-ENG(NEW) 3/30/59 9:37 AM Page 7