Sony ICD-UX60 - Manual (Page 60)

ICD-UX60/UX70/UX80 GB 3-283-649-11(1)
0
GB
Using a USB AC
Adaptor (not
supplied)
USB connector of the
IC recorder
USB AC adaptor
(not supplied)
You can charge the rechargeable battery
by connecting the IC recorder to an AC
outlet using a USB AC adaptor AC-U50A/
AC-U50AD (not supplied).
You can charge the battery while you are
using the IC recorder, so that it is useful
when you want to record for a long time.
Note
Your dealer may not handle some of the above
listed optional accessories. Please ask the
dealer for detailed information.

1
Remove the USB cap from the
IC recorder and connect the IC
recorder to a USB AC adaptor (not
supplied) .
2
Connect the USB AC adaptor to an
AC outlet.
Now you can use the IC recorder while
changing the battery.
While the battery is charging, the
remaining battery/charging indicator
are displayed in an animation.
When the remaining battery/charging
indicator indicates “ ,” charging is
completed. (Charging time: approx. 8
hours*)
When you use the IC recorder for the
first time, or after you have not used
the IC recorder for a certain time, it
is recommended that you charge
the battery repeatedly until “ ” is
displayed.
If the remaining battery/charging
indicator is not displayed, charging has
not been done properly. Proceed from
step 1 again.