Samsung AH68-02333R - Manual (Page 30)

0
English
Setup
English
1
HDMI AUDIO
The audio signals transmitted over the HDMI Cable
can be toggled On/Off.
Off : Video is transmitted over the HDMI
connection cable only, and audio is output
through the product speakers only.
On : Both video and audio signals are transmitted
over the HDMI connection cable, and audio
is output through your TV speakers only.
NOTE
The default setting of this function is HDMI Audio
Off.
HDMI Audio is automatically down-mixed to 2ch
for TV speakers.
When HDMI Audio is set to On, PL II /DSP EQ
/P.BASS doesn't work.
In the iPod mode, this menu is not available.
With HDMI AUDIO set to 'On', the volume can be
adjusted only using the TV remote control.
User EQ
You can configure the equalizer settings manually to
your preference.
Settings
m Move " Select ' Return
a Reset > Adjust < Move ' Return
User EQ
dB
6
·
·
·
·
·
·
·
·
·
·
·
·
-6
250Hz 600Hz 1kHz 3kHz 6kHz 10kHz 15kHz
NOTE
This can be also done using the DSP/EQ button.
(see page 38)
Audio Return Ch.
You can enjoy TV sound from the Home Theater
speakers by using just one HDMI cable.
~
~
✎
`
`
`
`
`
✎
`
Off : Turn the Audio Return Channel function off.
Auto : Listen to TV sound from the Home Theater
speakers if your TV is compatible with the Audio
Return Channel function.
NOTE
When Anynet+ (HDMI-CEC) is Off, the Audio
Return Channel function is not available.
Using an ARC (Audio Return Channel)-
uncertified HDMI cable may cause a problem in
compatibility.
ARC function is only available if an ARC-
compliant TV is connected.
System
Initial Setting
By using the Initial Setting, you can set the language,
TV aspect and ASC(Auto Sound Calibration) setting.
Check if the ASC microphone is connected to the
product.
NOTE
If an HDMI cable is connected to the product,
the TV aspect does not appear and it is set to
16:9 Wide automatically.
DivX(R) Registration
View DivX(R) VOD Registration Code to purchase
and play DivX(R) VOD content.
NOTE
This option is not activated if you select OK.To
activate this option, please activate the DivX(R)
Deactivation.
Even after you reset the system, the settings of
DivX Registration will not be reset.
DivX(R) Deactivation
Select this to get a new registration code.
~
~
✎
`
`
`
✎
`
✎
`
`