Samson MDR624 - Manual (Page 9)

BALANCE (Stereo Inputs Only)
The MDR624’s BALANCE control is used to place or position a mono
input into the stereo main Left and Right MIX bus. For a stereo input,
the balance control is used to center the sound between the Left and
Right Mix bus. You can create a stereo image by panning some input
signals to the left and others to the right.
PAN (Mono Inputs Only)
The MDR624’s PAN control is used to place or position the mono
signal into the stereo main Left and Right MIX bus. You can create a
stereo image by panning some input signals to the left and others to
the right. The MDR624’s PAN control is a Power-Pan circuit, which
includes a 3dB dip in the center position. This is desirable since
there’s a 3dB increase in gain when the mono input signal is heard in
both the Left and Right MIX bus.
PEAK LED
The MDR624’s MIC/LINE pre-amp also includes a CLIP LED which,
when illuminated, indicates that the signal is peaking or overloading.
To reduce distortion, lower the GAIN control to keep this LED from
staying on.
FADER
The MDR624’s rotary input FADER controls the overall channel level.
The input FADER features an audio taper and no detents for smooth
fades.
5
4
Controls and Functions
0 10
PAN
0
L R
0
LEVEL
0 10
PEAK
5
CHANNEL 1
6
MONO INPUT CHANNEL SECTION
7
L BAL
0
L R
0
7
7
5
6
4