Silex technology PRICOM C- 5100 - Manual (Page 4)

1-4 Introduction
Users Manual CX
2. AC ADAPTER
Danger:
Never attempt to disassemble or repair an AC Adapter, as exposure to electric shock hazards may result.
Always contact the dealer of silex technology, Inc. product if repair or replacement is required.
Warning:
Always use the AC Adapter provided with PRICOM, to avoid any risk of fire or material damage. Using an
unauthorized and incompatible AC Adapter could result in bodily injury or material damage.
Caution:
Never bend or twist the power cord and never pull on the power cord in an attempt to remove the plug from
the socket. Never place heavy objects on the power cord, as this could damage the cord. Always grasp the
plug when you unplug the power cord. Unplugging the power cord by pulling on the cord itself could
damage the cord.
3. NETWORK CABLES
Danger:
Never use damaged or worn network cables. The use of damaged or worn network cables could result in
electric shock, burns or fire.
4. PROPER TREATMENT OF THE DEVICE
Warning:
To avoid any risk of short-circuit, fire or other internal damage, never allow any metal objects such as
screws or paper clips to fall into the device. If that should happen, immediately turn off the power and
unplug the power cord. Contact the dealer of silex technology, Inc. product for appropriate assistance. To
avoid damage to PRICOM, never allow any liquids to spill into any part of PRICOM, and never expose
PRICOM to rain or water. If any of these events should occur, turn off PRICOM immediately.
Contact the dealer of silex technology, Inc. product for assistance before attempting to use PRICOM again.
To prevent computer malfunction or equipment damage, never place PRICOM on top of (or adjacent to) a
heating device, and never expose it to direct sunlight. Never store PRICOM in a locked and unventilated
vehicle, where excessive internal temperatures may be encountered. Always unplug the power cord during
lightning storms in order to protect the device from possible damage as a result of a power surge. If
PRICOM is ever dropped and damaged, or if you ever detect the emission of an extraordinary odor or
excessive heat, unplug the power cord and turn off the printer and PRICOM immediately. Contact the
dealer of silex technology, Inc. product for appropriate assistance.