Sirius Satellite Radio SIR-CL1 - Manual (Page 14)

13
Notes:
• When the name of a channel stored in memory is changed by SIRIUS, the display
will show the new channel name immediately. It will not be removed from the
preset channel location.
• A channel stored in memory may be discontinued at the option of SIRIUS. If you
attempt to access this channel from the preset location, the receiver will give you
the “INVALID CH” or “INVLD CH” response. At that time, you may select
another station to store in memory.
Category selection function
SIRIUS allows you to select broadcast channel by category.
Receiving stations selected by category
1. Press the [RDM] (RD) button to enter the category selection mode.
2. Turn the [ROTARY] knob clockwise or counterclockwise to select a category. Or,
press a [DIRECT] button if the category is preset.
3. Press or button to tune in a station from the Category. The “CA”
indicator is displayed in the function mode indication during seek tuning. The
CAT indicator lights on models without a function mode indication.
4. Press the [RDM] (RD) button again to cancel.
Notes:
• When the category selection mode is entered, the category of the current or last
received channel is displayed first.
• Press the or button within 7 seconds after a category has been set to
continue seeking channels up or down. The category selection mode is
canceled and normal reception is resumed if no operation is performed for 7
seconds.
Presetting a category
A category can be preset by registering specific categories in [DIRECT] buttons 1
to 6. Then the desired category can be recalled by pressing the corresponding
[DIRECT] button.
1. Press the [RDM] (RD) button to enter the category mode.
2. Turn the [ROTARY] knob clockwise or counterclockwise to select a category.
3. Press and hold one [DIRECT] button for 2 seconds or longer to store the current
category in the preset memory.
Notes:
• When the name of a channel stored in memory is changed by SIRIUS, the display
will show the new channel name immediately. It will not be removed from the
preset channel location.
• A channel stored in memory may be discontinued at the option of SIRIUS. If you
attempt to access this channel from the preset location, the receiver will give you
the “INVALID CH” or “INVLD CH” response. At that time, you may select
another station to store in memory.