Sony DVP-NS15 - Manual (Page 16)

16
Step 4: Connecting to an AV amplifier (receiver)
If your AV amplifier (receiver) has a Dolby Digital*
1
, DTS*
2
or MPEG audio decoder and a
digital input jack, use this connection.
z Hint
For correct speaker location, see the operating instructions supplied with the connected components.
• Surround effect
Dolby Digital (5.1ch), DTS (5.1ch), MPEG audio (5.1ch)
*1 Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the double-D symbol
are trademarks of Dolby Laboratories.
*2 “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Notes
• After you have completed the connection, make the appropriate settings in Quick Setup (page 17). If your
AV amplifier (receiver) has an MPEG audio decoder function, set “MPEG” to “MPEG” in Audio Setup
(page 57). Otherwise, no sound or a loud noise will come from your speakers.
• The TVS effects of this player cannot be used with this connection.
• In order to listen to DTS sound tracks, you must use this connection. DTS sound tracks are not output
through the LINE (RGB)-TV (SCART) jack, even if you set “DTS” to “ON” in Quick Setup (page 17).
COAXIAL
DIGITAL OUT
L C E N T E R
COAXIAL
DIGITAL OUT
AV amplifier (receiver)
with a decoder
: Signal flow
Coaxial digital cord
(not supplied)
to DIGITAL OUT (COAXIAL)
Rear (L)
CD/DVD player
[Speakers]
Front (L)
[Speakers]
to coaxial
digital input
Rear (R)
Front (R)
Subwoofer Center