How to fit from seated position – Sunrise Medical HOYER 374-90010 User Manual

Page 2

Advertising
background image

Part no. 374-90010

Rev A

HOW TO FIT FROM SEATED POSITION

Make sure the hand grips and seams are on the

outside of the sling. Feed the sling down the back

of the patient, leaving the commode aperture at

the base of the spine. Check the sling is square

across the shoulders.

Bring the longest leg piece stiffener forward so

that it is parallel with the long bone of the thigh.

Ensuring that the leg piece is not twisted, take

the shortest leg piece stiffener under and up

between the legs. Repeat this procedure for the

other leg. Cross strap A through strap B.

Pass strap C up through strap B then repeat for

other leg using strap D through strap A.

Check the sling is smooth under the pateient and

the position is comfortable. Move the hoist into

position and attach the leg straps to the spreader

bar using the coloured loops. This maintains the

patient in an upright sitting position. The lift may

move towards the patient as you do this. When

reseating the patient the hand grips may be used

to ensure a good posture.

Advertising