Parts and accesories index, Features and effectiveness, Use of your product (continued) – Summer Infant 03170 User Manual

Page 4: Troubleshooting

Advertising
background image

PARTS AND ACCESORIES INDEX

Main Body
1. Probe
2. Start Button
3. LCD
4. O/I Button
5. Battery Cover

4

(4)

FEATURES AND EFFECTIVENESS

(1)

(2)

(3)

(5)

Features
• The ear thermometer is simple and convenient to use with one
button operation.
• Loading of a probe cover is not required before taking a
measurement, making the thermometer more user-friendly and
more cost-effective.
• Measures temperature in one second.
• Unique and slim design, following the contour of human’s palm for
easy handling.
• Comes with a large LCD for easy reading.
• Operated by two AAA batteries for easy replacement.
• Auto-off function helps you to save energy in the batteries.
• The ear thermometer is light and compact, allowing you to take
it everywhere.

Effectiveness
• Compared to traditional thermometers, which require several
minutes to take the temperature, the ear thermometer takes only one
second to display the measurement.
• It is safer to take the temperature in the ear, as there is no risk of
infection caused by contact with mucous membrane in the oral cavity
or the rectum as in conventional measurement.
• Operating environment from 41°F-104°F(5°C-40°C) makes it easy for you
to take a measurement.

USE OF YOUR PRODUCT (continued)

9

3. Starting the measurement
• Press and release the O/I button.
• Ensure that the “ready to measure” sign “

” is displayed and a

beep sound is heard before measurement. If the START button is

pressed before the sign is displayed, the thermometer will not start

the measurement.

• It will beep once and measurement will begin.
• After one second, the ear thermometer will give out a beeping

sound to signal completion of measurement. Remove the ear

thermometer from the ear canal and check the reading on the

display panel.

• If you want to repeat the measurement, start measuring after it

beeps (about 10 seconds after the last measurement) and the

“ready to measure” sign “

” is displayed. You can repeat the

process again from step 3 onwards.

4. Power off
• Power will be automatically turned if the thermometer is left

unattended for 1 minute.

TROUBLESHOOTING

Conditions

Possible cause and solution

• Nothing is displayed after O/I

button pressed

• Battery may be worn out.
• Replace with new battery.
• Battery may not be placed in

the correct polarities.

• Place batteries according to

the polarities indicated

If you encounter problems with the operation of your Ear Thermometer,
please check the following points to see if they can be rectified. If the
problem still persists, please contact the service center for servicing.

Do not disassemble or attempt to repair the thermometer yourself.

Advertising