Sterling 2 - Manual (Page 13)

10 Iss 1
Seat Adjustment
1. To adjust seat height, remove the seat as
described (Photo 10.5).
2. Move the seat post to the new position and refit
the seat pin (Photo 10.6).
3. Refit the seat.
Seat Removal and Adjustment
Removing the Seat
Please note that these instructions are to be
used as a guide only.
1. Lift armrests upwards for ease of access (Photo
10.1) .
2. Stand behind the seat and fold the backrest down
(Photo 10.2).
3. Grasp the seat base and keeping a firm grip, lift
the seat vertically, keeping your back straight.
Bend knees if required (Photo 10.3).
4. Place seat at desired location for stowage,
keeping back posture straight at all times, bend
knees where required (Photo 10.4).
Note: Exercise caution when lifting the seat.
Armrest Adjustment
The width of the armrests can be adjusted by
loosening the two thumbwheel knobs located under
the seat base, moving the armrests to the desired
position and re-tightening the thumbwheel knobs
(Photo 10.7).
Photo 10.2
Photo 10.4
Photo 10.3
Photo 10.6
Photo 10.1
Photo 10.5
Photo 10.7