Cleaning and maintenance – Smeg 129316 User Manual

Page 16

Advertising
background image

129316

After every drying clean the fi lter, located in the

inner part of the door.

Lift the fi lter lid (Fig.).

Pull your fi ngers over the fi lter to remove fi bers

and threads lining. Replace the fi lter cover.

If necessary, also clean the fi lter housing and door

sealing.

Cleaning of the fi lter on the lower side of the
door opening
(only with some models)
Before removing clothes from the drum, clean the
fi lter on the lower side of the door opening with a
damp cloth or wet hand.

If the fi lter is clogged in such way that it needs
washing, pull it out from its bed (Fig.), wash it under
hot water and dry. Be sure that the replaced fi lter
snaps safely to its position, and only then close the
fi lter lid.

If the fi lter is not regularly cleaned, the

airfl ow is obstructed, which causes longer
drying time and danger of overheating.

Empty the container and occasionally

clean the water condensation device.

Emptying the water containere
Empty the container after every drying procedure:
pull the container out, pull out the draining nozzle,
pour out the water and replace the container.

Water from condenser tank is not

drinkable! If fi ltered it may be used for
ironing.

16

Cleaning and maintenance

Cleaning the fi lter

Cleaning the
condensation dryer

Advertising