Savin 5502 - Manual (Page 13)

Accessing the User Tools (System Settings)
5
1
D
Change the settings by following the instructions on the display panel.
Then press the
[OK] key.
Note
❒ [OK] : Press to set the new settings and return to the previous menu.
❒ [Cancel] : Press to return to the previous menu without changing any data.
Exiting from the User Tools
A
After changing the User Tools settings, press the [Exit] key on the User
Tools Main Menu.
Changing the User Tools is completed, and the machine is ready for copying.
Note
❒ To exit from the change of the machine's default settings and return to
Copy mode, press the { User Tools/Counter } key.
❒ You can also exit from the User Tools by pressing the { User Tools/Counter }
key.