Sharper Image SN005 - Manual (Page 10)

Replacing the Battery
Notes:
• Dispose of the used batteries properly, in accordance to
the environmental laws in your area.
• Press and hold the four buttons to reset the watch if it is
operating in an unfavorable way or malfunctioning.
Auto Synchronization
Once the battery is installed, the receiver circuit is acti-
vated. The antenna icon on the LCD blinks. (See Figure
4.) The bars facing the antenna indicate the strength of
the radio signal: no bars mean there is no signal or a very
weak signal being received; one bar indicates a weak sig-
nal; 5 bars indicate the strongest signal. (See Figure 5.) Use
10