Speco Technologies UHF 128 - Manual (Page 3)

• FCC Compliant
• 128 Frequency-selectable for interference free usage
• Frequency Range: 740-752MHz
• Uni-directional, electret condenser lapel microphone
• Mini XLR connection to lapel microphone cord
• Belt clip for fastening
• LCD display with channel and battery life readings
• Gain control dial
• Ability to be recharge with MWR-100/200UHF receivers
• Dimensions: 2.5” W x 4” H x 1” D
Specifications
Power Output . . . . . . . . . 10mW (max.)
Oscillator . . . . . . . . . . . . . PLL synthesized
Frequency Stability . . . . . ±0.005%
Maximum Deviation . . . . ±48KHz with limiting
compressor
Spurious Emission . . . . . . >60dB below carrier
frequency
T.H.D. . . . . . . . . . . . . . . . . <1.0% (at 1KHz)
Power Supply . . . . . . . . . . DC1.5V x 2AA
rechargeable or dry batteries
Tone Key . . . . . . . . . . . . . . 32.768KHz
Mic Unit . . . . . . . . . . . . . . Uni-directional electret
condenser unit
Current Consumption . . 115mA ± 10mA
MWLP-UHF
Professional UHF Frequency-Selectable PLL Lapel Microphone
• FCC Compliant
• 128 Frequency-selectable for interference-free usage
• Frequency Range: 740-752MHz
• Uni-directional, electret condenser handheld microphone
• LCD display with channel and battery life readings
• Ability to be recharge with MWR-100/200UHF receivers
• Dimensions: 2.5” W x 11” H
Power Output. . . . . . . . . . . . 10mW (max.)
Oscillator. . . . . . . . . . . . . . . . PLL synthesized
Frequency Stability . . . . . . . ±0.005%
Maximum Deviation . . . . . . ±48KHz with limiting
compressor
Spurious Emission . . . . . . . . >60dB below carrier
frequency
T.H.D. . . . . . . . . . . . . . . . . . . . <1.0% (at 1KHz)
Power Supply . . . . . . . . . . . . DC1.5V x 2AA rechargeable
or dry batteries
Tone Key . . . . . . . . . . . . . . . . 32.768KHz
Mic Unit. . . . . . . . . . . . . . . . . Uni-directional electret
condenser unit
Current Consumption . . . . . 115mA ± 10mA
MWHH-UHF
Professional UHF Frequency-Selectable PLL Handheld Microphone
• Cardioid, electret condenser microphone
• Uni-directional
• Sensitivity -67+/- 4dB (0dB=1V/ µbar, 1kHz)
• Impedance: 600 ohms
• Frequency range: 100-16,000Hz
• Max. operation voltage: 10V DC
• Standard operation voltage: 1.5V DC
• Current consumption: Max. 0.5mA
• Sensitivity reduction: Within -3dB at 1V
• S/N Ratio: > 40dB
• Weight: 2 oz.
• Cord Length: 3 ft.
• Wind Screen Included
MW
-HSLC
Professional Lightweight Condenser
Headset Microphone
Specifications