SMC Networks EZ-Connect SMCWIPCAM-G - Manual (Page 19)

Physical Description
This section describes the externally visible features of the
camera.
Front Panel
There are two LED indicators on the front panel of the camera:
Power LED and Link LED.
1. Power LED
The Power LED is positioned on the right side of the two LEDs.
A steady light confirms that the camera is powered on.
2. Link LED
The Link LED is positioned on the left side of the two LEDs. A
steady light confirms that the camera has good connection to
LAN connectivity.
Dependent on the data traffic, the LED will begin to flash to
indicate that the camera is receiving/sending data from/to the
network.
3. Internal MIC
The built-in omni-directional microphone allows the camera to
receive sound and voice.
9