Shoprider SUNRUNNER 3 888B-3 - Manual (Page 9)

6/1/2007 9
Armrest Angle Adjustment (Fig. 9)
Flip up the armrests to allow access to the
adjustment screw and lock nut, unscrew the
lock nut and screw the bolt in or out to
increase or decrease the angle. Re-tighten
the lock-nut.
Your scooter is dispatched from the factory
with the armrests set parallel to the floor.
Retractable charger cord (FOR
Sunrunner™ 3 Deluxe & Sunrunner™ 4
Deluxe ONLY) (Fig. 10)
Pull cord by the cord handle to length
desired. To retract cord, slightly pull cord
and release. Cord will retract automatically.
WARNING!! Releasing the cord too fast
can cause the cord to hit the shroud and
crack it!!
Figure 9
Locking
Nut and
Bolt
Adjustment
Screw
Figure 10
Retractable
charger
cord