Sony DAV-LF1 - Manual (Page 30)

30 GB
After connecting the speakers, IR transmitter,
and the AC power cords (mains leads), adjust
the wireless system for good transmission.
1
Press POWER on the surround
speaker (L) to turn on.
The system and surround speaker (L) turn
on and the POWER/ON LINE indicator
turns red.
2
Orient the IR transmitter and the IR
receiver of the surround speaker (L) to
face each other.
Adjust the position until the POWER/ON
LINE indicator turns green.
Tip
The IR transmitter is movable for easy reorientation.
Notes
• Make sure that there is no obstruction such as a
person or object between the IR transmitter and the IR
receiver of the surround speaker (L). Otherwise, the
sound from the surround speakers may be interrupted.
• If the POWER/ON LINE indicator turns red, the
transmission is incomplete. Adjust the position of the
IR transmitter and surround speaker (L) until the
POWER/ON LINE indicator turns green.
• If the POWER/ON LINE indicator flashes in red, the
IR receiver of the surround speaker (L) is receiving an
infrared signal from another Sony’s wireless product.
Move the IR transmitter and/or the surround speaker
(L) so that the POWER/ON LINE indicator turns
green.
When placing the surround
speaker (L) in the (R) position
Depending on the location of the wall outlet
(mains), you can also place the surround speaker
(L) (with the IR receiver) in the (R) position if
necessary.
1
Press AMP MENU.
2
Press X/x repeatedly until “Customize”
appears in the front panel display, then
press ENTER or
c.
The system enters the Customize Menu
mode.
3
Press X/x repeatedly until “Surround
Speaker Reverse” appears in the front
panel display, then press ENTER or
c.
4
Press X/x repeatedly until the item you
want to set appears in the front panel
display.
xReverse Off SL SR (default)
Sets the surround speaker (L) (with the IR
receiver) in the (L) position.
xReverse On SR SL
Sets the surround speaker (L) (with the IR
receiver) in the (R) position.
5
Press AMP MENU.
Turns off the AMP menu.
Step 5: Adjusting the Wireless System
POWER
DIR-R3
IR receiver
POWER
POWER/
ON LINE
indicator