Silvercrest KH 2375 - Manual (Page 67)

- 65 -
You can play the data again by switching to the
USB or SD/MMC mode with the
MD/LD button and
then accessing the corresponding title from the data
carrier.
Copying MP3 files
You can copy individual titles from an MP3-CD to
the external USB data carrier or an SD/MMC me-
mory card.
• During playback of a title from an MP3-CD hold
down the SCN/REC button.
The notice COPY MMC appears.
• Press the
SCN/REC button several times to select
either the copy option COPY USB (copy to a
USB data carrier) or COPY MMC (copy to an
SD/MMC memory card).
• Start the copy process by pressing the BND/ENT
button.
During the copy process COPY appears in the display
and a procentage indicator from 01 - 100 shows
the copying progress. After the notice COPY 100
the copying process is ended and playback of the
MP3 title continues.
Recording from the radio or audio input
With your radio you can also record data from the
radio and/or the audio input to a USB memory
stick or a memory card.
• Place a memory medium into the card slot or
USB port and with the MD/LD button select the
radio mode or operation type AUX.
• If necessary start playback of the external audio
device.
• Hold down the SCN/REC button.
The notice REC MMC appears.
• Press the
SCN/REC button several times to select eit-
her the recording option USB (Recording to a USB
memory medium) or MMC (Recording to an
SD/MMC memory card).
• Start the copy process by pressing the BND/ENT
button.
• To stop the recording press briefly the BND/ENT
button once more. After WAIT is shown briefly in
the display, the recording is saved.
Information regarding the recorded
data
The recording will be saved to the data carrier
with the following notations:
Audio CD recordings: Track01, Track02 ...
MP3-CD recordings: Music01, Music02 ...
Radio recordings: Tuner01, Tuner02 ...
Audio CD and radio recordings are recorded
in stereo and with a bitrate of 128 kbps
and/or a sampling frequency of 44 kHz.
When copying MP3 files the recording format
of the copy source will be adopted.
Bluetooth operation
Connection
• Connect the microphone unit to the car radio as
described under "Connection/Connection sche-
matics".
To use the microphone unit you need a mobile tele-
phone, which supports Bluetooth data transmissions.
Coupling a telephone with the car radio
• Carry out a search for Bluetooth devices on your
mobile telephone.
• After a successful search the entry CAR--BT appears
for the car radio in the display of the mobile tele-
phone.
• Select this entry for the connection and for the
subsequent password request enter the pass-
word 0000 for the car radio. You may possibly
have to confirm the connection structure once
more.
After a successful coupling CONNECT briefly appears
in the car radio's display and the green LED on the
microphone unit lights up.
IB_KH2375_VY3995_LB5 04.07.2008 11:24 Uhr Seite 65