Samsung ML-2850 - Manual (Page 31)

8 .3
<Maintenance>
3 Thoroughly shake the cartridge 5 or 6 times to distribute the toner
evenly inside the cartridge.
4 Hold the toner cartridge by the handle and slowly insert the
cartridge into the opening in the printer.
Tabs on the sides of the cartridge and corresponding grooves
within the printer will guide the cartridge into the correct position
until it locks into place completely.
5 Close the front cover. Make sure that the cover is securely closed.
Caution
• Avoid reaching too far into the printer. The fuser area may be
hot.
• To prevent damage to the toner cartridge, do not expose it to
light for more than a few minutes. Cover it with a piece of
paper, if necessary.
• Do not touch the green surface underside of the toner
cartridge. Use the handle on the cartridge to avoid touching
this area.
Caution
• If toner gets on your clothing, wipe it off with a dry cloth and
wash clothing in cold water. Hot water sets toner into fabric.
Note
• At this stage, if you need to replace the toner cartridge, see
page 8.4.
Replacing the toner cartridge
A toner cartridge has reached its estimated cartridge life. :
• The printer stops printing.
• The Smart Panel program window appears on the computer.
• The Error LED blinks red.
At this stage, the toner cartridge needs to be replaced. For toner
cartridge ordering information, see page 7.1.
1 Open the front cover.
2 Pull the old toner cartridge out.
3 Remove the new toner cartridge from its bag.
Note
• Estimated cartridge life means the expected or estimated toner
cartridge life, which indicates the average capacity of print-
outs and is designed pursuant to ISO/IEC 19752. (See
Specification on page 11.1.) The number of pages may be
affected by operating environment, printing interval, media
type, and media size. Some amount of toner may remain in the
cartridge even when the error LED blinks red, and the printer
stops printing.
Caution
• Do not use sharp objects, such as a knife or scissors, to open
the toner cartridge package. They might scratch the drum of
the cartridge.