Samsung ML-2850 - Manual (Page 14)

1 .5
<Introduction>
Place the machine on a flat and stable surface for not letting it tilt
more than 2 mm (0.08 inches). Otherwise, it may affect the printing
quality.
2 Unpack the machine and check all the enclosed items.
3 Remove the tape holding the machine tightly.
4 Install the toner cartridge.
5 Load paper. (See "Loading paper" on page 4.4.)
6 Make sure that all the cables are connected to the machine.
7 Turn the machine on.
Caution
•This equipment will be inoperable when mains power fails.
•When you move the machine, do not tilt or turn it upside
down. Otherwise, the inside of the machine may be
contaminated by toner, which can cause damage to the
machine or bad printing quality.
•When the printer driver is in the installation process, the
driver detects the locale information of your operating
system, and sets the paper size for your machine. If you
use the different Windows locale, you must change the
paper size of your machine for matching your commonly
used paper size. Open the printer properties to change the
paper size.
Altitude adjustment
The print quality is affected by atmospheric pressure, which is
determined by the height of the machine above sea level. The following
information will guide you on how to set your machine to the best print
quality or best quality of print.
Before you set the altitude value, find the altitude where you are using
the machine.
1 Ensure that you have installed the printer driver with the provided
Printer Software CD.
2
Double-click the Smart Panel icon on the Windows task bar
(or Notification Area in Linux).
You can also click Smart Panel on the status bar in Mac OS X.
3 Click Printer Setting.
4 Click Setting > Altitude Adjustment. Select the appropriate value
from the dropdown list, and then click Apply.
Note
If your machine is connected to a network, SyncThru Web Service
screen appears automatically. Click Machine Settings > Setup (or
Machine Setup
) > Altitude Adj. Select the appropriate altitude value,
and then click Apply.
High 3
1
Normal
4
Value
2
High 2
3 High 1