Tga-7401, Tga-7201, Specifications – Sunfire TGA7401 User Manual

Page 18: Appendix, Power output, Power at clipping, min, Hum and noise, Maximum output current, Maximum output voltage, Output impedance front left and right channels

Advertising
background image

User's Manual

18

APPENDIX

© 2008 Sunfire, a division of Elan
Home Systems, LLC.

All rights reserved. Sunfire reserves
the right to improve its products at

any time. Therefore, specifications are
subject to change without notice.

Manual part # : 913-153-00 Rev A

TGA-7401

Power output

400 watts continuous, per chan-
nel, into eight ohms, at 1 kHz
with no more than 0.5% T.H.D.

Power at clipping, min

800 watts per channel into four
ohms.

Hum and Noise

-118 dB, A-Weighted

Maximum output current

120 amps peak to peak per ch.

Maximum output voltage

56.6 Vrms

Output impedance Front
Left and Right channels

Voltage source: Approx. zero ohms
Current source: Approx. one ohm

RCA Input impedance:

24 kΩ

Input sensitivity for rated
output

Unbalanced: 1.9 Vrms

Balanced: 0.95 Vrms

XLR Input impedance:

10 kΩ, each leg balanced to
ground

Female XLR

Pin 1 is ground

Pin 2 is positive (hot)

Pin 3 is negative (cold)

Damping Factor:

150

12 VDC Trigger Inputs

Input voltage range 5 -18 VDC
Impedance: approx 600 Ω

(20 mA @ 12 V)

Removable terminal block, and
dual 1/8" minijacks for daisy-chain-
ing.

Power Consumption

45 W

At idle

580 W

Typical (1/8th power)

1440 W

Continuous power

Dimensions and Weight

17.0 inches wide

5.75 inches high (including feet)
16.7 inches deep (to tips of con-

nectors)

Weight 40 lbs

TGA-7201

Power output

00 watts continuous, per chan-
nel, into eight ohms, at 1 kHz
with no more than 0.5% T.H.D.

Power at clipping, min:

400 watts per channel into four
ohms.

Hum and Noise

-115 dB, A-Weighted

Maximum output current

80 amperes peak to peak per

channel

Maximum output voltage

40 Vrms

Output impedance Front
Left and Right channels

Voltage source: Approx. zero ohms
Current source: Approx. one ohm

RCA Input impedance

24 kΩ

Input sensitivity for rated
output

Unbalanced: 1.34 Vrms

Balanced: 0.67 Vrms

XLR Input impedance

10 kΩ, each leg balanced to
ground

Female XLR

Pin 1 is ground

Pin 2 is positive (hot)

Pin 3 is negative (cold)

Damping Factor:

150

12 VDC Trigger Inputs

Input voltage range 5 -18 VDC
Impedance: approx 600 Ω

(20 mA @ 12 V)

Removable terminal block, and
dual 1/8" minijacks for daisy-chain-
ing.

Power Consumption

45W

At idle

280W

Typical (1/8th power)

1440 W

Continuous power

Dimensions and Weight

17.0 inches wide
5.75 inches high (including feet)
16.7 inches deep (to tips of con-

nectors)
Weight 34 lbs

Specifications

Advertising
This manual is related to the following products: