Samsung ML-1520P - Manual (Page 101)

S OLVING P ROBLEMS
6.4
Problem Possible Cause Solution
The printer
does not print.
(continued) The printer driver may
be incorrectly
installed. Reinstall the printer driver; see
page 2.17. Try printing a demo page.
The printer is
malfunctioning. Check the LEDs on the control panel to
determine if the printer is indicating a
system error.
Printer selects
materials from
the wrong
paper source. The paper source
selection in the printer
properties may be
incorrect. For many software applications, the paper
source selection is found under the Paper
tab within the printer properties. Select
the correct paper source. See page 4.6.
Paper does not
feed into the
printer. Paper has not been
loaded correctly. Remove paper from the tray and reload it
correctly.
There is too much
paper in the tray. Remove excess paper from the tray.
The paper is too thick. Use only paper that meets the
specifications required by the printer.
Print job is
extremely
slow. The job may be very
complex. Reduce the complexity of the page or try
adjusting the print quality settings.
The maximum print speed of the printer
is 14(A4) or 15(Letter) pages per minute.
If using Windows 9x/
Me, the Spooling
Setting may be set
incorrectly. From the Start menu, choose Settings
and Printers. Right-click the Samsung
ML-1520 Series printer icon, choose
Properties, click the Details tab, and
then choose the Spool Settings button.
Select the desired spool setting.
Half the page
is blank. The page layout is too
complex. Simplify the page layout and remove any
unnecessary graphics from the document.
The page orientation
setting may be
incorrect. Change the page orientation in your
application.
The paper size and
the paper size settings
do not match. Ensure that the paper size in the print
settings matches the paper in the tray.