Sirius Satellite Radio SIR-4150 - Manual (Page 16)

COLOR CCD CAMERA User’s Manual 31 COLOR CCD CAMERA User’s Manual 30
Operating Your Camera
5) When a name has been chosen, please select a position for the name display.
Please move the cursor onto 'POS' and then press the SETUP button.
The name will appear at the top left hand corner.
Please find the position you wish to display the name by using the 4
directional buttons, and then press the SETUP button.
6) Please select 'END' and then press the SETUP button to complete ID input.
to Locate, then SET
FRONT DOOR
to Locate, then SET to Locate, then SET to Locate, then SET
FRONT DOOR
DAY&NIGHT (ICR TYPE) : Select from COLOR, B/W or AUTO modes.
•AUTO: According to the input luminance level, IR Cut Filter is automatically
switched to the appropriate mode for daytime or night-time. The COLOR
mode is operated for daytime, and it converts to BW mode for night-time
•COLOR : COLOR mode
•B/W : BW mode. Please press SETUP button to turn on or off the burst signal on
BW mode.
• If AGC is OFF, you can't select AUTO mode and B/W mode.
When DayNight mode is set to Auto under the condition which the strong IR light
is flickering periodically, a malfunction of IR-Cut filter may occur.
Note
MOTION DETECTION :
This product has a feature that allows you to observe movements of objects in 4
different areas on the screen, and the words 'MOTION DETECTED' appear on the
screen when movement is detected; hence a single individual can conduct
supervision efficiently. The camera detects an object's movement by sensing
disparity of outline, and level of brightness and color.
• Please press the SETUP button.
- OFF : MOTION DETECTION mode is cancelled.
- ON : Any motion in the selected areas is observed.
• Please select the area you wish to observe from the 3 areas in AREA SEL mode.
• Please select ON mode for the chosen area.