Sanyo VCC-HD4600P - Manual (Page 6)

5
Resuming recording/Recognizing the recording medium: Press the
and SET buttons simultaneously.
The power indicator starts blinking and then stay lit after the camera
recognizes the recording medium and is ready for recording.
SD/HDD SETTINGS
Resetting the login password (for default users only): Press the and
buttons simultaneously.
Not supported via network operation
Power indicator
The indicator also works as an error indicator.
Power indicator: The indicator lights up when the camera is powered on.
Error indicator: The indicator blinks when an error occurs.
To activate the power or error indicator, via network operation on the
OPTION SETTINGS screen, change the setting for [POWER LED (FRONT)]
or [ERROR LED (FRONT)] respectively.
Bracket
This bracket may be attached to either the top or bottom face of the camera
depending on the installation environment.
For bracket installation, be sure to use the longer screws supplied.
Install the camera securely to a durable location, taking into account
the total weight of the camera mount (commercially available) and the
camera.
•
•
Name and Function of Each Component