Sony Cyber-shot DSC-H10 - Manual (Page 50)

50
Shooting menu For details on the operation 1 page 39
• For details on the white balance, see page 10.
• Under fluorescent lights that flicker, the white balance function may not work correctly even though you
select [Fluorescent Light 1], [Fluorescent Light 2] or [Fluorescent Light 3].
• Except in [Flash] mode, [White Bal] is set to [Auto] when you shoot images using the flash.
Adjusts the amount of flash light.
• The flash level can be set in 1/3 EV increments.
• The value is not displayed on the screen. It is indicated as
or .
• To change flash mode, see page 26.
• If the subject is too bright or dark, this adjustment may have no effect.
The flash strobes two or more times before
shooting to reduce the red-eye phenomenon when
using the flash.
(Flash) Adjusts for the flash conditions.
• You cannot select this item when shooting movies.
Flash Level: Adjusting the amount of flash light
+2.0EV Toward +: Makes the flash level higher.
0EV The amount of flash light that the camera adjusts
automatically.
–2.0EV Toward –: Makes the flash level lower.
Red Eye Reduction: Reducing the red-eye phenomenon