Sharp MD-MX10H - Manual (Page 16)

15
■ Repeat and random play
1
Select the desired programme source, CD or MiniDisc.
2
Press the P-MODE button.
● Each time this button is pressed, the mode will change in
the following order:
Repeat indicator
Random indicator
Disappears
3
Press the CD
06 06 06 06 06
or MD
06 06 06 06 06
button to start playback.
MD
06
CD
06
P-MODE
(Continued)
Repeat play
After the last track has been played, playback will return to
the first track and begin again.
Random play
When the CD
06
or MD
06
button is pressed, all of the
tracks will be played at random, and then playback will stop.
(The same track will not be played back twice.)
To cancel repeat or random play:
Press the P-MODE button until the "
R
" or "RANDOM" dis-
play disappears.
To repeat playback of selected tracks:
Enter the programme for the tracks you want and start repeat
play.
You can programme a single track and play it repeatedly
(refer to page 14).
Notes:
● If you press the CD
4
or MD
4
button during random
play, you can move to the next track. On the other hand,
the CD
5
or MD
5
button does not allow you to move
to the previous track. The beginning of the track being played
will be located.
● During APMS play, random play is not possible.
● When random or repeat play is selected during CD or Mini-
Disc playback, random or repeat play will start at that point.
● When using repeat play, be sure to press the CD ■ or MD
■ button after you have finished listening. Otherwise, the
disc will play continuously.