Spectra DPF-105 - Manual (Page 4)

3
NOTES:
Each notes’ SUBJECT and DATE can be synchronized from the Personal Computer.
 Press UP/DOWN buttons to scroll the notes list.
 Press CONFIRM button to enter and read details.
 Press UP/DOWN buttons to scroll through the text.
 Press LEFT/RIGHT buttons to skip the previous/next notes.
 Press CANCEL button to exit.
CALENDAR – CALENDAR NOTE:
Each calendar note’s SUBJECT and DATE can be synchronized from your Personal Computer.
 Press LEFT/RIGHT/UP/DOWN buttons to select day.
 Press CONFIRM button to enter and read details events of that day.
While in reading details,
 Press UP/DOWN buttons to scroll the text.
 Press LEFT/RIGHT buttons to skip to the previous/next day.
 Press CANCEL button to exit.
The above information can ONLY be synchronized from the Microsoft Outlook. Prior to
connect your unit to the PC for synchronization, this Microsoft Outlook software has to be
installed properly.
SHOPPING LIST:
Each shopping list’s SUBJECT and DATE can be synchronized from the Personal Computer.
 Press UP/DOWN buttons to scroll all items in the shopping list.
 Press CONFIRM button to enter and read the details.
While in reading details,
 Press UP/DOWN buttons to scroll through the text.
 Press LEFT/RIGHT buttons to skip to the previous/next shopping list.
 Press CANCEL button to exit.
SHOPPING LIST information can be entered using the provided software (Photoviewer).
DATE & TIME SETTING:
 In TIME mode, Press and hold the MENU button to start setting the time. (The YEAR
will flash to show the setting process is activated.)
 Press UP/DOWN buttons to increase/decrease the value of your selection.
The setting procedure: YEAR>MONTH>DAY>HOUR>MINUTE
 Press CONFIRM button to confirm each selection.
 The unit will switch back to the TIME mode once the time is set.
ALARM SETTING:
 Press UP button to activate the preset Alarm.
 Alarm icon will be shown on the top right corner to show the Alarm function is turned
on.
 Press DOWN button to deactivated the Alarm. (The alarm icon will disappear.)
To start setting the alarm time,
 Press and hold CONFIRM button to start setting the alarm time. (The HOUR will flash
to show the setting process is activated.)
 Press UP/DOWN buttons to increase/decrease the value of the hour.
 Press CONFIRM button to switch to set the MINUTE. (The MINUTE will flash)
 Press UP/DOWN button to increase/decrease the value of the minute.
 Press CONFIRM button to confirm and back to Alarm mode.
 The Alarm icon will be shown on the top right corner to show the Alarm function is
activated.
When the Alarm in enabled and alarm time is reached, the Alarm will sound for 1 minute. (
Beep…Beep…Beep….) Pressing any key will stop the alarm.
OPERATIONS