Sunrise Medical Guardian Automatic Overbed Table IC-6417 - Manual

Guardian
®
Automatic Overbed Table
User Instructions
Model IC-6417
POSSIBLE DAMAGE OR INJURY. Be alert of hi/lo adjustment of overbed table
when raising bed.
ASSEMBLY INSTRUCTIONS (FIGURE 1)
1. Place the top board upside down (holes facing up) on the floor. Align table post
with the six pre-drilled holes. Insert and tighten 6 screws to connect post to top
board.
2. Attach the base to the table post using the bolts and washers, and insert as
illustrated.
3. Slide the casters into the base until they lock into place.
4. Set overbed table upright by placing the casters on the floor.
Bolts
Washers
Casters
Table Post
Screws
Top Board
Figure 1