Speco Technologies CVC6146SCFF - Manual (Page 23)

- 23 -
NOTE
* In cases where the wrong Camera ID has been input........
Move the cursor to CLR and press SETUP button to erase characters from left to
right, and repeat the above steps to input the characters again.
1-5) To select the position where the Camera ID should be displayed on the screen.
① Move the cursor to POS and press the SET button.
CAMERA TITLE
0 1 2 3 4 5 6 7 8 9
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
▷
→ ← ↑ ↓ ( ) -
ㅡ
_ □ / = & : ~ , .
← → CLR POS END
② Created camera ID is displayed.
(Factory default position) CAM1