Shark BG-2820 - Manual (Page 8)

97-707 • Bg • reV. /07
OPERA
TOR’S MANU
AL
PRESSURE
W
ASHER
8
STep 8: turn the engine switch to "on" position.
on Briggs engines, move the throttle lever to "Fast"
position, shown on engine as a rabbit. STep 9: pull the starter grip. if the engine fails to start
after  pulls, squeeze the trigger gun to release pressure
and repeat step. return starter gently. after the engine
warms up enough to run smoothly, move choke to run
position and throttle to fast position.
CAUTION: Small engines may kick back. Do not hold
pull starter grip tightly in hand.
opeRaTING INSTRUCTIoNS (CoNT.)
WaRNING! Never replace
nozzles without engaging the
safety latch on the spray gun
trigger.
the five color-coded quick connect nozzles provide a wide array of
spray widths from 0° to 45° and are easily accessible when placed in the
convenient rubber nozzle holder, which is provided on the front of the
machine.
NoTe: For a more gentle rinse, select the white 40° or green 5° nozzle.
to scour the surface, select the yellow 15° or red 0° nozzle. to apply de-
tergent select the black nozzle.
NozzleS
Safety
latch
on-off
Switch