Samsung SyncMaster 225MS - Manual (Page 19)

Connecting Cables
Connecting to a Computer
Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
Use a connection appropriate for your computer.
Using the D-sub (Analog) connector on the video card.
- Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.
[ D-SUB ]
Using the DVI (Digital) connector on the video card.
- Connect the DVI Cable to the DVI-D Port on the back of your Monitor.
[ DVI-D ]
Connect the AUDIO terminal at the back of the monitor to the speaker output terminal on your
computer’s sound card using a sound cable.
Connecting to a Macintosh