Electronic programmer (on some models only), 1 setting the time, 2 semiautomatic cooking – Smeg FP132X User Manual
Page 8: 3 automatic cooking, Instructions for the user
Instructions for the User
37
7. ELECTRONIC PROGRAMMER (ON SOME MODELS ONLY)
LIST OF BUTTON FUNCTIONS
TIMER BUTTON
END OF COOKING BUTTON
COOKING DURATION BUTTON
VALUE DECREASE BUTTON
VALUE INCREASE BUTTON
MANUAL MODE BUTTON
7.1 Setting the time
When the oven is used for the first time, or after an interruption in the electricity supply, the display
flashes at regular intervals, showing
. Press
to stop the display flashing.
Keep the
key pressed and press the value modification keys
or
within 5 seconds to increase or
decrease the setting by one minute for each pressure.
Press the value modification keys
or
within 5 seconds to increase or decrease the setting by one
minute for each pressure.
Press one of the two value modification keys until the current time appears.
When the oven is in standby mode, to modify the time simply press the
key for a few seconds and set
the time using the
and
keys.
Before each programmer setting, switch on the function and set the temperature required.
7.2 Semiautomatic cooking
This function only switches the oven off automatically at the end of the cooking time.
Press the
key and the display will light up showing the figures
; keep it pressed, and at the
same time use the value modification keys
or
to set the cooking duration.
A few seconds after the
key is released, the count of the programmed cooking duration will start and
the display will show the current time together with the A e
symbols.
7.3 Automatic cooking
This function switches the oven on and off in fully automatic mode.
Press the
key and the display will light up showing the figures
; keep it pressed, and at the
same time use the value modification keys
or
to set the cooking duration.
Press the
key and the display will show the sum of the current time plus the cooking duration just set:
keep it pressed, and at the same time use the value modification keys
o
to set the cooking end
time.
A few seconds after the
key is released, the programmed count will start and the display will show the
current time together with the A symbol. When the cooking start time calculated automatically by the
timer on the basis of the data entered is reached, the display will show the A symbol.