Siemens HW300500 - Manual (Page 3)

3
ā
Safety
d
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
LEAVE THESE INSTRUCTIONS WITH THE APPLIANCE AFTER INSTALLATION IS
COMPLETE.
SAVE FOR THE LOCAL INSPECTOR'S USE.
Be sure your appliance is properly installed and grounded by a qualified technician
inaccordance with the National Electrical code ANSI/NFPA No. 7 latest edition (or
the Canadian Electric Code) and local electrical code requirements.
Important: Local codes vary. Installation, electrical connections and grounding must
comply with all applicable codes.
Never use your appliance for warming or heating a room.
Children should not be left alone or unattended in area where appliance is in use.
Do not allow children to sit or stand on any part of the appliance.
Do not repair or replace any part of the appliance unless specifically recommended
in the manual. All other servicing should be referred to a qualified technician.
Flammable materials should not be stored in the appliance.
Before put into operation a front must be attached.
ā
Installation
Before you begin
1. Saw
2. Phillips head screwdriver
3. Torx head screwdriver
4. Measuring tape
5. Drill with bits (3/32"; 11/32")
INSTALLER:
IMPORTANT:
Important safety
instructions
Tools and parts needed
Parts included