Samsung HT-DL105 - Manual (Page 20)

38
GB
DSP
(Digital Signal Processor)
Modes
B
• The following DSP modes are provided with this unit:
• These DSP modes can be used to add acoustic surround effects while reproducing
stereo analog or linear PCM digital signals.
• When one of the DSP modes is selected,the DSP indicator lights up on the display.
Press the DSP /DPL II Mode button.
DSP modes available according to the input signal format
O : Possible, X : Not possible
HALL : Provides a clear vocal and simulates the feeling of a concert hall.
THEATER : Simulates the feeling of a theater.
PAVILION : Simulates the spacious feeling of a pavilion with a high ceiling.
DANCE CLUB : Simulates the sound of a dance club with a throbbing bass beat.
LIVE CLUB : Simulates the feeling of a live music club with a low ceiling.
DSP modes have been designed to simulate different acoustic environments.
The sound heard in a hall, theater, pavilion, dance club, or live club consists of direct
and indirect sound —early reflections and reflections from behind.
Direct sounds reach the listener directly without any reflection.
Indirect sounds are delayed by the distance of the ceiling and walls.
These indirect sounds are an important element of the acoustic surround effect.
37
Sleep Function
To set up Sleep
• Each time the button is pressed the selection
toggles as follows: SLEEP 10
➔ SLEEP 20
➔ SLEEP 30 ➔ SLEEP 60 ➔ SLEEP 90
➔ SLEEP 120 ➔ SLEEP 150 ➔ OFF.
• The remaining time for the selected Sleep time is
displayed.
• Pressing the button once again changes the Sleep
time from the last setting.
Sleep
Press the Sleep button.
What is the
Sleep function?
You can set the delay time so that
the unit powers off automatically
after a preset period of time.
To Review Sleep Setting