Sony WEGA KV-27FS100L - Manual (Page 11)

3
Using the Remote Control
Remote Control Description
Button Description
1 MUTING Press to turn off the sound. Press again or press
to restore sound.
2 SYSTEM OFF Press to turn off the equipment programmed into
the remote control. See “Programming the Remote
Control” on page 5.
3 TV/VCR Press to switch between TV and VCR mode. If you
have a non-Sony VCR, you will need to program
the remote control to recognize your VCR. For
details; see “Programming the Remote Control” on
page 5.
4 PICTURE MODE Press repeatedly to step through the available video
picture modes: Vivid, Standard, Movie and Sports.
Also available in the Video menu. See “Using the
Video Menu” on page 24 for details.
5 SLEEP Press repeatedly until the TV displays the time in
minutes (15, 30, 45, 60, or 90) that you want the TV
to remain on before shutting off automatically.
Cancel by pressing until Sleep Off appears.
6 JUMP Press to jump back and forth between two channels.
The TV alternates between the current channel and
the last channel that you selected. JUMP will not
work if any FUNCTION Mode (VCR/DVD, SAT/
CABLE, TV) is activated.
7 TV/SAT Press to switch between the TV and SAT (satellite)
inputs when in SAT FUNCTION mode.
Press for a direct selection of Effect settings
(Surround, Off) when the remote is in TV
FUNCTION mode.
See “Using the Audio Menu” on page 25 for details.
8 RESET Press to return to factory settings while in an
on-screen menu.
9 VOL (volume) Press (+) or (-) to adjust the volume.
q; CODE SET Press to program your remote control to operate
connected video equipment. See “Programming the
Remote Control” on page 5.
qa POWER buttons Press to turn on and off the TV and other audio/
video equipment you have programmed into the
remote control. For instructions, see “Programming
the Remote Control” on page 5.
A
B
C
D
E
F
L
M
N
O
P
Q
G
H
I
J
K
R
S
T
U