Sony CMD-Z5 - Manual (Page 21)

21 GB
Basic
Operation
One active call (or one call on hold) and one call waiting
When your phone alerts you (beep) that a call is waiting, there are several
options available.
1 The display automatically offers you call
waiting options.
2 Select Swap to put the active call on hold
and connect the waiting call.
or
Press the Jog Dial backward and select
one of the following options.
Swap to alternate between the active call and the call on hold.
Busy to indicate to the calling party that your line is engaged.
Replace to end the active call and retrieve the call waiting.
End all calls to end all established calls and accept the call
waiting.
Mic off/Mic on
to mute/unmute the microphone.
Note
In step 1 select Busy to indicate to the calling party that your line is engaged.
Conference call
A call with more than 2 participants.
To set up a conference call, press the Jog Dial backward to open the Call
menu then select Join from the Call menu.
Note
It is possible to talk with a maximum of 5 callers. Contact your Network Operator
for details.