SEH Computertechnik SEH InterCon PS54-G - Manual (Page 15)

Hardware Installation Guide 15
Mounting the Print Server
The print server can be used for printers with parallel or USB interface. You can
connect up to two printers. It is also possible to connect a hub to the USB
interface of the print server and use it with up to four additional printers.
Proceed as follows:
1. Turn the printer off.
2. Connect the data cable to the print server.
3. Connect the power cord to the print server.
4. Turn the printer on.
5. Press the status button of the print server in order to print out a status page.
A status page can only be printed if the printer supports ASCII, PostScript, or the
DATAMAX format (label printer).