Samsung DynaFlat TX-P3076WH - Manual (Page 69)

69
S
P E C I A L
F
E AT U R E S
Note
• Depending on your STB(Set Top Box), the picture size may vary.
Setting the DVI Standard
When your set top box is connected through the DVI input, the picture may shift to
the left or right if the correct DVI standard is not selected. To select the correct DVI
standard.
2
Press the … or † button
to select “DVI Standard”,
then press the ENTER
button.
1
Press the MENU button.
Press the … or † button to
select “Setup”, then press
the ENTER button.
3
Press the … or † button to
select “SMPTE” or “861B”, then
press the ENTER button
Press the EXIT button to exit.
Language : English √
Time √
V-Chip √
Caption √
Menu Transparency : Normal √
Function Help : Off √
DVI Standard : SMPTE √
Language : English √
Time √
V-Chip √
Caption √
Menu Transparency : Normal √
Function Help : Off √
DVI Standard : SMPTE √
T V Setup
T V Setup
Language : English
Time
V-Chip
Caption
Menu Transparency : Normal
Function Help
: Off
DVI Standard : SMPTE
T V Setup
SMPTE
861B
AA68-03388A-00_eng_Chapter4 4/21/04 5:19 PM Page 69