Samsung DynaFlat TX-P3076WH - Manual (Page 31)

31
O
P E R AT I O N
Adding and Erasing Channels
To add channels that were not memorized (or to delete unwanted channels from
memory):
1
Use the number buttons to
directly select the channel
that will be added or
erased.
Press the MENU button.
Press the … or † button
to select “Channel”, then
press the ENTER button.
2
Press the … or † button
to select “Add/Delete”, then
press the ENTER button.
3
Repeatedly pressing the
ENTER button will
alternate between Add
channel and Delete channel.
Press the number buttons (or
CH /
buttons) to switch
to the appropriate channel,
then repeat step 3.
Press the EXIT button to exit.
Channel 11-0 Not In Memory
Press ENTER to add the channel
Add OK
Channel 11-0 In Memory
Press ENTER to delete the channel
Delete OK
<Add channel>
<Delete channel>
Add/Delete
Add/Delete
Antenna : Air √
Auto Program √
Add/Delete √
Favorite Channels √
Name √
Fine Tune √
Signal Strength √
T V Channel
Antenna : Air √
Auto Program √
Add/Delete √
Favorite Channels √
Name √
Fine Tune √
Signal Strength √
T V Channel
Alternate method:
Simply press the ADD/DEL but-
ton on the remote control to
add channels that were not
memorized or to delete
unwanted channels from
memory.
▼
To return to the Channel
menu, move to "OK" by pressing
the button and then press the
ENTER button.
e
r
Channel 11-0 In Memory
Press ENTER to delete the channel
Delete OK
Add/Delete
AA68-03388A-00_eng_Chapter3 4/21/04 5:23 PM Page 31