Samsung DynaFlat TX-P3076WH - Manual (Page 32)

32
O
P E R AT I O N
Changing Channels
Using the Channel Buttons
Press the CH or CH button to change channel.
When you press CH or CH , the TV changes channels in sequence. You will see all the
channels that the TV has memorized. (The TV must have memorized at least three channels.)
You will not see channels that were either erased or not memorized.
Using the Number Buttons
Use the number buttons to quickly tune to any channel.
Press the number buttons to go directly to a channel.
For example, to select channel 27, press “2” then “7”. The TV will
change channels when you press the second number.
When you use the number buttons, you can directly select channels that were either erased or
not memorized.
To select a channel over 100, press the +100 button. (For channel 122, press “+100”, then “2”,
then “2”.)
To change to single-digit channels (0–9) faster, press “0” before the single digit. (For channel
“4”, press “0”, then “4”.)
Using the Previous Channel
Press the PRE-CH button.
The TV changes to the last
channel you were watching.
AA68-03388A-00_eng_Chapter3 4/21/04 5:23 PM Page 32