Samsung DynaFlat TX-P3076WH - Manual (Page 47)

Checking the Digital-Signal Strength
Unlike analog channels, which can vary in reception quality from “snowy” to clear,
digital (HDTV) channels have either perfect reception quality or you will not receive
them at all. So, unlike analog channels, you cannot fine tune a digital channel.
You can, however, adjust your antenna to improve the reception of available digital
channels.
1
Press the MENU button.
Press the … or † button
to select “Channel”, then
press the ENTER button.
2
Press the … or † button to
select “Signal Strength”,
then press the ENTER
button.
3
If the signal strength meter
indicates that the signal is
weak, physically adjust your
antenna to increase the sig-
nal strength.
Continue to adjust the
antenna until you find the
best position with the
strongest signal.
Press the EXIT button to exit.
Note
• “No Signal” may appear on the screen depending on the broadcasting
station conditions, even though an incoming broadcast signal exists.
S
P E C I A L
F
E AT U R E S
Digital
Antenna : Air √
Auto Program √
Add/Delete √
Favorite Channels √
Name √
Fine Tune √
Signal Strength √
T V Channel
Antenna : Air √
Auto Program √
Add/Delete √
Favorite Channels √
Name √
Fine Tune √
Signal Strength √
T V Channel
T V Signal Strength
OK
47
S
P E C I A L
F
E AT U R E S
AA68-03388A-00_eng_Chapter4 4/21/04 5:18 PM Page 47