Sony VAIO PCV-L630 - Manual (Page 23)

Using the Memory Stick® Media 19
8
From the PictureGear File menu, point to File Process, and then select
Still Format Conversion.
9
Select Memory Stick as the Output Format.
10
Use the Browse button to select the DCIM/100MSDCF folder on the
Removable Disk (S:) drive.
11
Name the file. The file name must begin with DSC (DSC0xxxx). The
full file name without extension must have at least eight characters.
The order in which your photos appear in your slide show will be
determined by the number (xxxx) in the file name. Some examples of
acceptable file names are DSC00001.jpg and DSC00002.jpg
12
Click OK to save the file.
You can also add MPEG1 video files to your Slide Show by following the
steps below. The order in which your video clips (MOV0xxxx files)
appear in your Slide Show is determined by the number (xxxx) in the file
name.
1
Insert the Memory Stick into the media slot.
2
Click the My Computer icon on the desktop.
3
Click the Removable Disk S: icon.
4
Create a new folder and name it “MSSONY.”
5
Open the MSSONY folder and create a new folder named
“MOML0001.”
6
From the PictureGear File menu, point to File Process, and then select
Still Format Conversion.
7
Copy the MPEG file into the MOML0001 folder.
8
Rename the MPEG file MOV0xxxx.mpg, where xxxx is any four-digit
number.
9
To begin showing your slides, eject the Memory Stick and then
reinsert it. The slide show will begin automatically.