StarTech.com SV231DDUSB - Manual (Page 9)

Instruction Manual
6
Specifying Hotkeys
You can specify the command key as needed, by entering it within the configuration utility.
For example, you can specify the hotkey for switching to PC 1 as CTRL - ALT - A by typing
an A (not case-sensitive) in the editable field.
Hotkey Sequence = CTRL - ALT - [command key]*
* The command key is user-definable via the configuration dialog box
Please note that if you intend to modify the command key, you have to modify them on each
and every one of the connected computers, since the hotkey setting is stored within each
connected computer.
With the exception of control keys such as Alt, Ctrl, Shift, CAPS, Tab, Esc, all keys on the
keyboard, including number keys on the number pad, are qualified to be used as hotkey
command keys.
Fix Audio to Port x
Check this option and then select the PC to which the audio/mic channel is to be fixed.
Once this option is checked, the audio/mic channel will be fixed and become non-
switchable.
Fix Hub Ports to Port x
Check this option and then select the PC to fix the hub ports to it. Once this option is
checked, hub ports will be fixed to that PC port and become non-switchable
Auto-Scan Period
Select the Auto-scan period, from 10 ~ 60 seconds, with an increment of 5 seconds. The
Auto-scan period is the time your KVM Switch will wait before switching to next to the PC.
Universal Hotkey
Select the Universal hotkey among Scroll, CAPS, Numlock, F12, Escape. Two
consecutive keystrokes of the selected key and a number key will switch to the
corresponding port.
KVM Switcher configuration
Right-click the KVM Switcher icon and select Settings (Windows) or Preferences (Mac)
or double-click the icon to bring up the configuration dialog box.