Sony D-FJ61 - Manual (Page 7)

7
To Press
Play/Pause (pause only available on the CD player) u (N for the remote control)
Stop x/CHG (x for the remote control)* 2
Find the beginning of the current track (AMS* 1 ) .once quickly* 2
Find the beginning of the previous tracks (AMS) .repeatedly* 2
Find the beginning of the next track (AMS) > once quickly* 2
Find the beginning of the succeeding tracks (AMS) > repeatedly* 2
Go backwards quickly Hold down .* 2
Go forward quickly Hold down >* 2
* 1 Automatic Music Sensor
* 2 These operations can be done during both play and pause.
You can operate your CD player as shown in the above table by using the controls on the CD
player or remote control.
About the display
• When you press u (N for the remote control) after changing the CD or turning off and on
the player, the total number of tracks in the CD and total playing time appear for about two
seconds.
• During play, the track number and the elapsed playing time of the current track appear.
• Between tracks, the time to the beginning of the next track appears with the “
-” indication.
• During pause, the elapsed playing time flashes.
Setting the maximum volume level
(D-FJ65 and the AR model of D-FJ61 only)
1 Set VOL (volume) on the remote control to maximum.
2 Adjust the volume on the CD player to the level that you want it to be. This level becomes the
maximum volume for the remote control.
If the volume level does not increase
Is AVLS set to “LIMIT”? Set AVLS to “NORM.” For details, see “Protecting your hearing
(AVLS).”
Playing a CD
(Continued)