Show map ip dscp, Show map ip dscp -228 – SMC Networks SMC Tiger 10/100 SMC6128L2 User Manual
Page 528
Advertising
C
OMMAND
L
INE
I
NTERFACE
4-228
Example
The following example shows how to map IP DSCP value 1 to CoS
value 0.
show map ip dscp
This command shows the IP DSCP priority map.
Syntax
show map ip dscp [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Always unit 1)
- port - Port number. (Range: 1-28)
• port-channel channel-id (Range: 1-8)
Default Setting
None
Command Mode
Privileged Exec
Console(config)#interface ethernet 1/5
Console(config-if)#map ip dscp 1 cos 0
Console(config-if)#
Advertising