Sharper Image SI738 - Manual (Page 7)

Setting the Clock
1. With the POWER button off, press MODE six times. The
current hour setting flashes on the display.
2. To decrease hours, press CH-. To increase hours, press CH+.
3. Press MODE again. Current minute setting flashes on
the display.
4. To decrease minutes, press CH-. To increase minutes,
press CH+.
To rapidly change the setting, press and hold CH- and CH+
buttons. If no additional buttons are pressed, the setting is
saved and the display returns to normal.
Setting the Alarm
1. With the POWER button off, press MODE. Alarm hour setting
flashes on the display.
2. To decrease hours, press CH-. To increase hours, press CH+.
3. Press MODE again. Alarm minute setting flashes on
the display.
Quick Start
7