Connecting audio from external components, Optical : connecting an external digital component, Aux2 : connecting an external analog component – Samsung HT-TX45 User Manual
Page 11: Aux1 : connecting an external component/mp3 player
ENG
CONNECTIONS
21
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
1
Connect the Digital Input (OPTICAL) on the Home Theater to the Digital Output of the external digital com-
ponent.
2
Press the
AUX
button on the remote control to select <DIGITAL IN>.
■
You can also use the
FUNCTION
button on the main unit.
The mode switches as follows :
DVD/CD
➝
DIGITAL IN
➝
AUX 1
➝
AUX 2
➝
USB
➝
FM.
OPTICAL : Rear Panel
Optical Cable
(not supplied)
20
Please observe the following cautions for your safety.
■
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit
may rise and may damage it.
■
Do not obstruct the cooling fan or ventilation holes. If the cooling fan or ventilation holes are covered
with a newspaper or cloth, heat may build up inside the unit and fire may result.
The cooling fan supplies cool air to the unit to prevent overheating.
Cooling Fan
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
AUX1 : Connecting an External Component/MP3 player
Components such as an MP3 Player
1
Connect AUX IN 2 (Audio) on the Home Theater to the Audio Out of the external analog component.
■
Be sure to match connector colors.
2
Press the
AUX
button on the remote control to select <AUX2> input.
■
You can also use the
FUNCTION
button on the main unit.
The mode switches as follows :
DVD/CD
➝
DIGITAL IN
➝
AUX 1
➝
AUX 2
➝
USB
➝
FM.
1
Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the external component/MP3 player.
2
Press the
AUX
button on the remote control to select <AUX1> input.
■
You can also use the
FUNCTION
button on the main unit.
The mode switches as follows :
DVD/CD
➝
DIGITAL IN
➝
AUX 1
➝
AUX 2
➝
USB
➝
FM.
Connecting Audio from External Components
Audio Cable
(not supplied)
If the external analog compo-
nent has only one Audio Out,
connect either left or right.
• You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR
to this product.
AUX1 : Front Panel
AUX2 : Rear Panel
Audio Cable
(not supplied)
X30_TX35(1~39P) NOGB 2007.4.10 10:35 AM Page 20