Sony CMT-EX1 - Manual (Page 26)

26
Specifications
Amplifier section
For the U.S. model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 4 ohm loads both channels driven, from 70 –
20,000 Hz; rated 10 watts per channel minimum RMS
power, with no more than 0.9% total harmonic
distortion from 250 milliwatts to rated output.
Canadian model:
Continuous RMS power output (Reference)
15 + 15 watts
(4 ohms at 1 kHz, 10% THD)
European model:
DIN power output (Rated)
12 + 12 watts
(4 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
15 + 15 watts
(4 ohms at 1 kHz, 10% THD)
Music power output (Reference)
15 + 15 watts
Other models:
DIN power output (Rated)
12 + 12 watts
(4 ohms at 1 kHz, DIN, 240 V)
12 + 12 watts
(4 ohms at 1 kHz, DIN, 220 V)
Continuous RMS power output (Reference)
15 + 15 watts
(4 ohms at 1 kHz, 10% THD,
240 V)
15 + 15 watts
(4 ohms at 1 kHz, 10% THD,
220 V)
Inputs TAPE IN: voltage 250 mV,
impedance 47 kilohms
Outputs TAPE OUT: voltage 250 mV,
impedance 1 kilohms
CD OUT: Optical
PHONES (stereo mini jack):
accepts headphones of 8 ohms or
more
CD player section
System Compact disc and digital audio
system
Laser Semiconductor laser (
λ
=780 nm)
Emission duration: continuous
Laser output Max. 44.6 µW*
* This output is the value
measured at a distance of
200 mm from the objective lens
surface on the Optical Pick-up
Block with 7 mm aperture.
Frequency response 20 Hz – 20,000 Hz
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range 87.5 – 108.0 MHz
(50 kHz step)
Antenna FM wire antenna
Antenna terminals 75 ohms unbalanced
Intermediate frequency 10.7 MHz
AM tuner section
Tuning range
European model:
531 – 1,602 kHz
(with the interval set at 9 kHz)
Other models: 531 – 1,602 kHz
(with the interval set at 9 kHz)
530 – 1,710 kHz
(with the interval set at 10 kHz)
Antenna AM loop antenna
External antenna terminals
Intermediate frequency 450 kHz